Surrounded by scooters during my brief trip to Paris, I just couldn’t resist snapping as many as possible. In particular, whenever I spotted a Vespa PX or older I had to get a photograph. Click on inside to see the images I caught.

Since welcoming a 1975 Serveta Lambretta Jet 200 into the family at the beginning of the month I’ve been tied up too much with other matters to post much additional news, so I owe you a few notes dear readers.

Last Wednesday evening on my way home from work during the sudden NYC mid-June downpour, my PX decided it would be the perfect time to snap a clutch cable.

Part three wraps up this mod with the installation and testing of your new semi-hydraulic front disc brake.

In part two we walk-through the process of removing your existing stock front drum brake set-up.

The front drum brake on vintage Vespas has never been celebrated for its stopping power. But there are a couple of things you can do about it. Read on to learn about hydraulic brake options.

This morning I figured I’d take a slightly different route on my ’85 Vespa PX from the East Village to work in Midtown in an effort to keep things interesting. The exhaust coming off the bike proved to be more interesting.

Turns out that what I thought was a problem with the flasher unit in my PX was ultimately a simple case of a flat battery. After putting the battery on trickle charge overnight using my Battery Tender everything fired back into life again this morning.

No scoot into work today. The PX has flatly refused to flash a turn signal. They’re all dead. Front, back, left, right. Nothing, nada.

I replaced the back drum brakes on my PX150e last night. All in all the job took about an hour and a half, and certainly went much faster than the front brakes did a couple of weeks ago.